Saturday, May 28, 2011

Four Ways to Make Your Battery Last Longer

by DAVID POGUE, On Tuesday 24 May 2011, 1:48 SGT

A good friend of mine had been complaining that her iPhone 3GS battery was holding less and less of a charge. When we got together at 5 p.m. one recent day, it was at 5 percent full - and it had been fully charged that morning. She had barely used it all day. The phone was apparently running itself dry simply by being turned on.

The single biggest battery consumer is the screen brightness. But it wasn't especially bright on this phone.

So I suggested that she take the phone to an Apple store to get the $60 battery replacement service. In fact, there was an Apple store only two blocks away, so I accompanied her - and found out, upon arrival, that there is no $60 battery replacement service! There's one for iPods, but apparently not for the iPhone.

There are plenty of do-it-yourself and third-party battery-replacement services that advertise online, but the Apple store Genius, named Nicole, said none of that would be necessary. She tested the battery and found that it was perfectly fine!

Instead, Nicole pointed out a few things that were contributing to my friend's rapid battery depletion. I took notes and thought I'd pass them along.


  • Push e-mail. This, I believe, was the big one. My friend has seven e-mail accounts, and her phone was checking each of them every 15 minutes. If you turn off the "Push" feature, and set it to Manually instead (in Settings->Mail, Contacts, Calendars->Fetch New Data), then your iPhone checks for e-mail only when you actually open the e-mail app. Your battery goes a lot farther.

(If you have a corporate Exchange account, your calendar and address-book data will similarly be updated only when you open those apps.)


  • GPS checks. In Settings ->General->Location Services, you'll see a list of all the apps on your phone that are using your phone's location feature to know where you are. (It's a combination of GPS, cell-tower triangulation and, on some phones, Wi-Fi hotspot triangulation.) All of that checking uses battery power, too. My friend had dozens of apps with Location Services turned on, many of which didn't really need to be on. She turned most of them off.



  • Notifications. Similarly, in Settings -> Notifications, you see a list of apps that are allowed to display pop-up notifications (those blue text bubbles that look like text messages). To do that, they have to monitor what's going on with your phone - and that takes juice. Turn off the ones you don't really need.



  • Background apps. Nicole the Genius discovered that my friend had a huge number of apps open - maybe 40 of them. She maintained that they were using battery power, too, in the background.

Now, I kept my mouth shut. But I'd been led to believe that background apps are generally frozen into suspended animation precisely so that they don't use battery power. In fact, Apple was criticized when it introduced "multitasking" in the latest iPhone software, precisely because apps don't actually keep operating in the background. Only a few sanctioned features keep running in the background (Internet radio playback and GPS tracking, for example).

Even so, Nicole quit all 40 of the apps that were still open. (To do that, double-press the Home button to open the multitasking app switcher. Hold your finger down on any icon until they all start wiggling. Tap the little X close boxes to manually quit open apps.)

Did the Nicole treatment work? Very well indeed. The next day, my friend's battery, by the same time of day (5 p.m.), was still at 80 percent!

So there you go: How to make your iPhone battery last a lot longer. For free. You're welcome.

Wednesday, May 18, 2011

Upgrade - Macbook Hard Drive with Win XP partition


Since I bought my Macbook in February of 2007 it has been rock solid with very few problems. I had my 150 GB Hard Disk partitioned to 3 parts for Mac OS, Shared Drive and Win XP.




After a few iPhoto project, I was running out of Hard Disk space to do anything else. So it was high time to upgrade the Hard Disk to Western Digital 500 GB. I still want my 3 partitions, but with 500 GB to play with. I can allocate 200 GB for my Mac OS, 100 for Shared Drive and the balance for Win XP. In addition, I want to upgarde the Mac OS 10.5 Leopard to OS X 10.6 Snow Lepard.




I had OS X Leopard installed so the process is pretty simple, just use Super Duper or Carbon Copy Cloner to do the copy, pull out the battery, unscrew the three screws and all would work. But, I installed Win XP so the problem became more complicated.



So I did my googling, and ran across WinClone. This was the easy way to save the Bootcamp partition without having to re-install everything. There is one HUGE downside though, but I’ll come to that in just a bit.



So, here was my procedure for upgrading my hard drive:



Pull out my current Macbook’s hard drive.Partition the new hard drive into two partitions.Then use WinClone to make an image of the Windows Partition.Clone my current Macbook’s Mac OS X Partition to the new Partition on the new driveRestore the Windows Vista Partition using WinClone.Install new Hard Drive and remove old hard driveBoot up new hard drive to verify that it all works, both OS X and Vista.Relax now that it is done?.
Now Let’s dive into each of these individual sections.



Step 1. Connect the new hard drive to the MacBook via USB.
I bought a 2.5″USB enclosure for the new 2.5″hard drive and connected it to the Macbook via USB.



Step 2. Partition the new hard drive into three partitions.
The MacBook detected the new hard drive and activated Disk Utility automatically. I partitioned the drive into 200GB for Mac OS X using HFS+ Journaled and 100GB for Shared Drive using MS-DOS and 100GB for Win XP using MS-DOS. This went smoothly.




Step 3. Clone the Macbook’s Mac OS 10.5 Partition.


Download Carbon Copy Cloner from the internet. It is a freeware, but please be kind to the developers by giving a generous donation when prompted. Run Carbon Copy Cloner to do an exact clone of my OS X Partition. It will direct you to select the drives accordingly to perform the cloning. This did take a while, but as expected went flawlessly. In comparison to cloning Win XP, this process is reletively fast.




Step 3. Use WinClone to make an image of the Windows Partition.
This worked beautifully, yet it took several hours to complete. (This is the downside that I mentioned earlier). So I started making an image of the Windows Partition. I hooked up the drive and enclosure to my iMac and did the WinClone procedure and saved the image to my iMac’s hard drive.



Remember, I have 2 macs, so it might be possible to do this with only one Mac, but it might be a bit slower. And you could have used the Mac Partition of the new hard drive to store the image to be restored. Then delete the file and do the Clone of the OS X Partition.



Step 4. Clone the Macbook’s Mac OS X Partition.
After the WinClone procedure finished I unhooked my old drive and put it back into my Macbook. After replacing the screws and battery I booted up the Macbook into OS X. I hooked up the newly partitioned hard drive to my Macbook and proceeded to use Super Duper to do an exact clone of my OS X Partition. This did take a while, but as expected went flawlessly.’



Step 5. Restore Windows Partition using WinClone .
Again, I hooked up the new hard drive to my iMac and went ahead and restored the saved image of Vista from WinClone onto the new hard drive. This, like the initial imaging process took hours to complete. But, I sat and waited and it did finished successfully.



Step 6. Install new hard drive and remove old hard drive.
I followed the same procedure as pulling out the old hard drive earlier. I pulled out the battery, removed the three screws and pulled out the hard drive. The hard drive is in a flimsy aluminum carriage that has a tab to easily pull the hard drive out. This is secured with 4 star screws which, luckily, I had a set of screw drivers that could remove these. I put the carriage on the new hard drive and reinstalled the hard drive, screws and battery.



Step 7. Boot up new hard drive to verify that it all works, both OS X and Vista.
This was the moment of truth. Did I screw something up? Did Winclone fail? Would everything boot up as expected? Well”¦ all copied and booted the first time without any problems. So it was a rousing success. I did test out both Operating Systems just to be sure that everything did work and that it would not crash on me in the middle of something. So far it hasn’t.



Step 8. Relax now that it is done?.
Obviously yes, I could relax knowing that everything booted and all of my data was secure.
Final Thoughts.



So Far everything is working as expected. The only little hitch I have run across is that it does seem to take longer than usual when accounts want to log off. While this isn’t a big problem it is a noticeable difference. I might try running some of the usual things, like Verify Disk and Onyx to clear up any caches and the like, just to see if that will correct the problem. I’d think it would. But if not, it’s not the end of the world.